I am having AR9485 Wireless Network Adapter from Atheros Communications Inc.
This is the o/p when I run
$ sudo lshw -C network
*-network
description: Wireless interface
product: AR9485 Wireless Network Adapter
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:02:00.0
logical name: wlan0
version: 01
serial: d0:df:9a:f5:5e:9c
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless
configuration: broadcast=yes driver=ath9k driverversion=3.2.0-17-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
resources: irq:16 memory:c2500000-c257ffff memory:9fb00000-9fb0ffff
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth0
version: 05
serial: 10:1f:74:c0:ce:5f
size: 10Mbit/s
capacity: 100Mbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s
resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff
The problem is, the wireless n/w is showing on the list. After selecting the n/w and entering the pass key it is continuously connecting and disconnecting to the n/w. I am not a pro in this. Please help me with this. Thanks..