Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

I gained an old machine, what's config is:

  • Pentium 2, 300 MHz
  • 147 MB SDRAM (recently extended)
  • 3 GB IDE HDD - primary master
  • 10 GB IDE HDD - primary slave (recently added)
  • 52x CD-ROM - secondary master floppy drive
  • 2x USB
  • 2x PS/2
  • 2x eth card (recently added 1 of them)
  • 2x video card (I wanted to try multi-seat :D:D:D) (recently added 1 of them)

Before my tries, there were Win98, what perfectly(lol) worked with this config.

With Ubuntu 10.04 alternate CD, I didn't think, that it can be installed with graphical interface.

I thought about LVM .. but no, I thought this is too slow processor. To the primary master(hda, 3GB) I put /boot with ext4, after Grub

error: unknown filesystem ext3; and swap for the other free space. To the primary slave(hdb, 10GB), I put / with ext4.

I've installed GRUB2 to MBR. It always showed me some error, and grub rescue> prompt. Finally I've learnt use that, and I tried to set prefix..., ls, insmod (hd0,1)/boot/grub/.... That last command always shows me error: unknown filesystem.

How may I partition this? The installion gets no errors, the /boot is filled with data files(linux images, etc.).

Is there any other suggestion to get on with old systems?

Thanks!

share|improve this question

closed as too localized by B. Roland, gertvdijk, Seth, Jorge Castro, Amith KK Feb 10 '13 at 6:54

This question is unlikely to help any future visitors; it is only relevant to a small geographic area, a specific moment in time, or an extraordinarily narrow situation that is not generally applicable to the worldwide audience of the internet. For help making this question more broadly applicable, visit the help center.If this question can be reworded to fit the rules in the help center, please edit the question.

1  
You sure you have enough RAM? help.ubuntu.com/community/Installation/SystemRequirements –  Alvin Row Nov 20 '10 at 23:57
    
Ubuntu Lucid kernel is just too big for the RAM you have. Give Puppy Linux a look; Ubuntu is explicitly not targeted to legacy hardware. –  msw Nov 21 '10 at 0:34
    
Thanks your comments. I try Ubuntu variants first, then other disto. –  B. Roland Nov 21 '10 at 15:44

3 Answers 3

In my experience on an hardware that old:

a) Puppy Linux b) Linux Mint Fluxbox c) Lubuntu

share|improve this answer
    
Okay, Ubuntu, then X- and Lubuntu, after that Mint & Puppy, Thanks –  B. Roland Nov 21 '10 at 15:45
    
Puppy will surprise you! :) –  Pitto Dec 6 '10 at 22:16

Forget about it, Ubuntu will never work correctly on this machine. There is a lot of GNU/Linux distributions out here that are very good on old machines like your.

share|improve this answer

You can install without the /boot partition. I would try installing either Ubuntu or Xubuntu on the the 10GB hard drive, and let grub install to sda. This has worked for me on a PII, 400MHz cpu with 128MB and 192MB ram. Good luck.

share|improve this answer
    
Thanks your anwser, I'll try that in next few days, and write the results. At first with Ubuntu, if it fails, I will use Xubuntu, I have experience with xfce yet. –  B. Roland Nov 21 '10 at 15:41
    
I've been tried with ubuntu 10.04 alternate this idea, it was better, then others, because it gone on grub, but now it displayed: General mountin' error, and then restarted, endless loop... After it, I'll try xubuntu 10.10 alternate, maybe... –  B. Roland Nov 21 '10 at 19:01

Not the answer you're looking for? Browse other questions tagged or ask your own question.