Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

Okay I have psensor installed, I installed lm-sensor and some other related packages, I ran sensors-detect and didn't come up with anything. It is only showing my HDDs, and my CPU usage not temperatures or anything like that.

Proc:

processor   : 3
vendor_id   : AuthenticAMD
cpu family  : 16
model       : 4
model name  : AMD Phenom(tm) II X4 920 Processor

Motherboard:

Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: GA-MA78GM-US2H

I'm pretty new to temperature sensors in linux, let alone fan sensors (which I would like too). What am I doing wrong?

share|improve this question
add comment

1 Answer 1

up vote 1 down vote accepted

AMD 10h k10temp kernel doc

Is the k10temp module loaded? It's part of the standard ubuntu kernel.

ubuntu-precise$ modinfo k10temp
filename:       /lib/modules/3.2.0-24-generic/kernel/drivers/hwmon/k10temp.ko
license:        GPL
author:         Clemens Ladisch 
description:    AMD Family 10h+ CPU core temperature monitor
srcversion:     7C939FE331D037CED8E383B
alias:          pci:v00001022d00001603sv*sd*bc*sc*i*
alias:          pci:v00001022d00001703sv*sd*bc*sc*i*
alias:          pci:v00001022d00001303sv*sd*bc*sc*i*
alias:          pci:v00001022d00001203sv*sd*bc*sc*i*
depends:        
intree:         Y
vermagic:       3.2.0-24-generic SMP mod_unload modversions 
parm:           force:force loading on processors with erratum 319 (bool)
share|improve this answer
    
/etc/modules only shows ip, rtc and it87 (last one added by lm-sensors) –  BloodyIron May 22 '12 at 16:44
    
I added this to my modules list, rebooted, and I seem to have fan and CPU temp sensors now. Although I have 3 sensors now, I am not sure which one is CPU? –  BloodyIron May 22 '12 at 18:18
    
Well on my i5... ls /sys/bus/platform/drivers/coretemp/coretemp.0 driver modalias power temp2_crit temp2_input temp2_max temp4_crit_alarm temp4_label uevent hwmon name subsystem temp2_crit_alarm temp2_label temp4_crit temp4_input temp4_max So it looks like it uses the hwmon interface. The hardware sensors applet works for me, just had to enter the prefs and enable the specific sensors. There's just so many of them. BTW it helps to accept answers that work to encourage other contributors. Thanks. –  ppetraki May 23 '12 at 4:24
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.