Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

I got OTA update for my Samsung Galaxy S2 - Android 4 (ICS). However, the adb devices does not show the device. Neither does lsusb. I am using ubuntu inside vmware Fusion on a Mac. If I disconnect the device from Ubuntu and use it in OS X, adb devices shows the device.

My udev rule contains the following entry:

SUBSYSTEM=="usb", SYSFS{idVendor}=="04e8", MODE="0666"

dmesg output does not include string 04e8.

I should note that I tried both USB modes (MTP and PTP).

share|improve this question

2 Answers 2

up vote 1 down vote accepted

I added these lines to Ubuntu.vmx file (I believe the last line makes a difference):

usb.quirks.device0 = "0x4e8:0x681d skip-reset" # Mass Storage
usb.quirks.device1 = "0x4e8:0x68a9 skip-reset" # Media
usb.quirks.device2 = "0x4e8:0x6877 skip-reset" # Kies
usb.quirks.device3 = "0x4e8:0x6866 skip-reset" # SGS2 ICS
share|improve this answer

Try dmesg again and try to grab vendor string that shows up as you connect your device. Substitute that ID for the one you currently have.

If nothing shows up, make sure Development mode is enabled on your S2.

share|improve this answer
    
Development mode (USB debugging) is enabled. It is working from host OS (OS X Lion). It was working from Ubuntu before I upgraded to ICS. dmesg and lsusb outputs: miha@ubuntu:~$ lsusb Bus 002 Device 005: ID 0e0f:0008 VMware, Inc. Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub –  miha May 17 '12 at 21:46
    
And dmesg: [ 3751.650501] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 3763.141707] usb 1-1: new high speed USB device using ehci_hcd and address 46 [ 3778.252927] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 3778.936251] usb 1-1: new high speed USB device using ehci_hcd and address 47 [ 3794.048386] hub 1-0:1.0: unable to enumerate USB device on port 1 –  miha May 17 '12 at 21:47

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.