Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

i was tryin to connect my ubuntu toshiba satalite L650 laptop with my desktop via a network cable so that i can share things and remotely control the desktop from the laptop, i googled the problem out and found a guide page , i followed all the steps , i installed samba, i had the two computer have the same workgroup name , i had everything correct, but i still dont see connection estbalished between the two computers, (neither one is visible to the other) what is missing ? thanx in advance.

share|improve this question
    
Are you connecting the 2 computers directly with a single cable or through a switch/router? –  lgarzo Apr 2 '12 at 8:36
    
directly (single cable) –  VeXe Apr 2 '12 at 8:48
    
Is this a cross-link (crossover) cable? en.wikipedia.org/wiki/Ethernet_crossover_cable –  lgarzo Apr 2 '12 at 9:54
    
i think its a RJ45 cable (its blue) –  VeXe Apr 2 '12 at 10:20
    
See my answer on crossover cable or an alternative solution with using a switch. –  lgarzo Apr 2 '12 at 10:32

2 Answers 2

up vote 2 down vote accepted

This link will help u go through these references :

What is the easiest method to share files between Windows and Ubuntu?

How to setup a LAN between Ubuntu and Windows

Sharing Internet

share|improve this answer
    
directly with a single cable –  VeXe Apr 2 '12 at 8:47
    
@Vexe is this answer is helpful 2 u or your problem get slove –  Gaurav_Java Apr 2 '12 at 8:48

You need a crossover cable to connect 2 machines directly (without a router/switch/hub).

Crossover cables are usually marked with a label and/or have red connectors, but it is not a standard. The best way to determine is to compare the wiring colours at the connectors. If they seem to match it is a straight through cable.

Crossover cable

Crossover cable

Alternatively you can use a switch/hub/router and another cable to connect the machines into a network. In this case you'll need 2 normal cables and a eg. switch:

[ Machine 1 ]-----[ Switch ]-----[ Machine 2 ]
share|improve this answer
    
Modern ethernet cables don't require to be crossover cable for connecting two same type of device. –  Web-E Apr 2 '12 at 10:38
    
@Web-E To be exact it is „modern interfaces” (the cables are basically the same). But anyway true if the LAN ports in the machines do support Auto-MDIX. Switches usually have this feature, so they are not sensitive to cable wiring. I'd suggest to either try to use a CO cable or connect through a switch to see if it makes any difference. –  lgarzo Apr 2 '12 at 10:58

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.