Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

I'm running Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work.

This is a pretty capable setup and definetly did have FF work previously, Note: I've downloaded and installed the ATI drivers from AMD. Not sure how to get WebGL working.

Updated

My video card info:

01:00.0 VGA compatible controller: ATI Technologies Inc Cypress [Radeon HD 5800 Series] (prog-if 00 [VGA controller])
    Subsystem: ATI Technologies Inc Device 0b00
    Flags: bus master, fast devsel, latency 0, IRQ 44
    Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Memory at fbee0000 (64-bit, non-prefetchable) [size=128K]
    I/O ports at d000 [size=256]
    Expansion ROM at fbec0000 [disabled] [size=128K]
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Legacy Endpoint, MSI 00
    Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    Capabilities: [150] Advanced Error Reporting
    Kernel driver in use: fglrx_pci
    Kernel modules: fglrx, radeon
share|improve this question
    
This is a pretty capable setup Can you please add more information to your question, we need to know your system and your graphics card to be able to help you. –  Bruno Pereira Mar 19 '12 at 8:53
    
Added update, thanks –  Victor S Mar 19 '12 at 14:25
add comment

2 Answers 2

up vote 2 down vote accepted

I have been able to get WebGL working by passing the aticonfig --initial command in the terminal. This is an installation step for the driver that I have initially missed.

share|improve this answer
add comment

From a week of mindnumbing research on this matter (as it does affect me as well), webGL implementation under the Catalyst 12.2 drivers are either: A) Blacklisted somewhere else rather than the normal locations (i.e. about:flags) or B) Blacklisted for ATI x86_64 devices across the board. This would mean that Chrome devs need to change some code in default configuration outside of what is editable by users. I CAN seem to get webGL working in Firefox 11, but framerate is less than half of what I was getting in Chrome. I will say that after trying xorg-edgers latest gpu drivers (665 fps) vs. ati catalyst 12.2 fglrx(760 fps), I have seen quite an increase in framerate, and I really don't want to go back until I see evidence that xorg-edgers is comparable, but the functionality is definitely lacking ATM for certain applications. I just wanted to throw commiserating information out there in hopes that more people might be able to spark interest in a fix.

I tried aticonfig --initial but the line didn't help the problem, even after reboot. I used the code to ignore the blacklist for hardware also, but with no success. I also changed about:flags in Chrome to the best possible configuration with no success. Is there anyone out there that has been able to solve this issue?

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.