Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

Can't print and scan from the same USB Hub.. When i try to print it give me a error msg asking if i connected the printer..

When i check for my self if it is connected it is with command lsusb

jeff@StudioPC:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 004 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 004 Device 003: ID 0040:073d  
Bus 001 Device 118: ID 03f0:2b17 Hewlett-Packard LaserJet 1020
Bus 001 Device 039: ID 03f0:3f11 Hewlett-Packard PSC-1315/PSC-1317

When i try to add a new printer the LasterJet printer wont show up.. Only the scanner So how do i configure so the printer will work?

share|improve this question
add comment

1 Answer

Make sure you install the "hplip" and "hpijs" packages using synaptic. These are very important to assist the user with installation and monitoring of the HP printers and scanners and all-in-ones too.

sudo apt-get install hplip
sudo apt-get install hpijs
share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.