I have just got myself a Ubuntu server and for some reason the Ctrl + C will not kill the process I am running. I have run this command on two terminals Cygwin and putty and logged in using ssh.
I can use the command locally and this is not a problem and also on other machines using Solaris. I have read some other posts on this site relating to this issue, however, my issue is still not resolved.
As the command works locally I am fairly confident that is not something in bash that needs to be set. (I use bash on all the machines I use). I am not trying to close processes like man or less using this command just scripts and standard processes where you expect it to work.
I have also tries Ctrl + Z and that does not work properly so not sure why it wont pick up any of these VERY useful commands. This is highly annoying for me.
I would like to learn as much as I can about Ubuntu as I have very little experience with it, if you have a solution can you include as much detail as possible?
Here is my stty -a:
speed 38400 baud; rows 24; columns 80; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = M-^?; eol2 = M-^?; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc ixany imaxbel -iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke