0

I've read the other posts..however I still have not fixed my interface. I have the following:

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
allow-hotplug eth0
iface eth0 inet static
post-up /sbin/ethtool -s eth0 speed 100 duplex full autoneg off
address 109.169.67.61
netmask 255.255.255.0
gateway 109.169.67.1
dns-nameservers 87.117.198.200 87.117.237.100 87.117.196.200

auto eth0:0
allow-hotplug eth0:0
iface eth1 inet static
        address 109.169.67.138
        netmask 255.255.255.0

auto eth0:1
allow-hotplug eth0:1
iface eth1 inet static
        address 109.169.67.139
        netmask 255.255.255.0

auto eth0:2
allow-hotplug eth0:2
iface eth1 inet static
        address 109.169.67.140
        netmask 255.255.255.0

auto eth0:3
allow-hotplug eth0:3
iface eth1 inet static
        address 109.169.67.166
        netmask 255.255.255.0

Any suggestions?

1
  • Have you tried just using the default Ubuntu interfaces config and seeing if that works? Here is the default config.
    – Alex Lowe
    Jan 29, 2016 at 22:13

1 Answer 1

0

Thanks, I found the solution:

ifconfig eth0:0 109.169.67.138 netmask 255.255.255.0 up
ifconfig eth0:1 109.169.67.139 netmask 255.255.255.0 up
ifconfig eth0:2 109.169.67.140 netmask 255.255.255.0 up
ifconfig eth0:3 109.169.67.166 netmask 255.255.255.0 up

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .