Hey guys my 2nd monitor is on but is just showing a black picture. my main monitor is connected to the video card (Amd 280) whereas the 2nd monitor i connected to the motherboards VGA port the VGA port is enabled in the bios so im not sure what is causing it not to be detected
Here is the output of xrandr
:
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
DFP1 disconnected (normal left inverted right x axis y axis)
DFP2 disconnected (normal left inverted right x axis y axis)
DFP3 disconnected (normal left inverted right x axis y axis)
DFP4 disconnected (normal left inverted right x axis y axis)
DFP5 disconnected (normal left inverted right x axis y axis)
DFP6 disconnected (normal left inverted right x axis y axis)
DFP7 disconnected (normal left inverted right x axis y axis)
DFP8 disconnected (normal left inverted right x axis y axis)
DFP9 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 298mm
1920x1080 60.0*+ 50.0 59.9 50.0 60.1 60.0
1776x1000 50.0 59.9 50.0 60.0
1680x1050 60.0
1400x1050 60.0
1600x900 60.0
1360x1024 60.0
1280x1024 75.0 60.0
1440x900 60.0
1280x960 75.0 60.0
1280x900 75.0 60.0
1360x768 60.0
1280x800 59.8
1280x768 59.8
1280x720 50.0 60.0 59.9
1024x768 75.0 60.0
1152x648 50.0 59.9
800x600 75.0 60.3
848x480 75.0 60.0
720x480 60.1 60.0 60.1 59.9
640x480 75.0 60.0 59.9
DFP10 disconnected (normal left inverted right x axis y axis)
CRT1 disconnected (normal left inverted right x axis y axis)
If you need any other outputs let me know.
CRT1
is off. Have you triedxrandr --output CRT1 --auto
?