3

I have bought a new Tata Docomo Photon 3G Dongle and I want to use it from Ubuntu 12.04.

When I connect the device, its detected but I don't know how to install the software packed within it or connect to internet.

I tried searching for the packages in Ubuntu Software Center but it doesn't work.

I tried manually adding the device in Mobile Broadband section, using different APNs and Service provider names.

It made no difference.

The device is ZTE MF190(HSUPA). Please tell me how to install the device software or connect to internet without installing the software.

How can I fix this ?

3 Answers 3

3

First you need to connect to internet some how beause some packages need to be installed. I had similar issue with my tatadocomo3g dongle. So I connected to internet using win7 and downloaded sakis3g and ran it on ubuntu(I have dual boot OS with win7 and Ubuntu 13.10).

You can get Sakis3g from here. Extract it and open a terminal and run sakis3g.

Then follow only steps explained in here to connect to internet. Now you are connected to internet.

Then if you want to install photon dashboard then follow these steps (remove Photon3G folder in /opt if you have already installed it once and if not working.)

  1. Before start installing open softwarecenter and install wvdial (some times if yout software center not detecting connection then run sudo stop network-manager in terminal)
  2. Open the Linux folder in Photon3G datacard and copy PCL_TATADOCIND.tar.gz to Desktop folder and extract it.
  3. Open it go to tools then open deb then open qt and open libqt3-mt_3.3.8-b-0ubuntu3_i386.deb using softwarecenter and install it, also install libaudio2_1.9.1-1_i386.deb.
  4. Then go back to deb/wvdial folder and install libwvstreams4.4-base_4.4.1-0.2ubuntu2_i386.deb then after that libwvstreams4.4-extras_4.4.1-0.2ubuntu2_i386.deb then libuniconf4.4_4.4.1-0.2ubuntu2_i386.deb , libxplc0.3.13_0.3.13-1build1_i386.deb and libmng1_1.0.9-1_i386.deb one by one using softwarecenter. (If it shows already latest version installed then no problem otherwise install.)
  5. Now after installed all packages you are ready to install.
  6. Open terminal type

    cd Desktop/

    cd PCL_TATADOCIND/

    sudo sh install.sh

Now it will install properly and Photon3G software will start working.

This is how I installed Tataphoton3g software and it is working in ubuntu 13.10 :-).

3
  • Your answer seems effective. I followed all the steps. Some packages in qt and wvdail aren't getting installed. Despite that, I used sudo sh install.sh. Now it's showing installed successfully. But in sakis3G it's unable to connect to 3G. Says failed to connect. Please help!
    – rusty-sj
    Mar 13, 2014 at 9:52
  • 1
    If you run sakis3g with settings mentioned as here you should be able to connect. Also try connecting with modem in other usb port.
    – Bibi424
    Mar 15, 2014 at 17:41
  • Awesome... It works like a charm :D
    – b-ak
    Apr 26, 2014 at 10:58
0

Plug your device and open Terminal

sudo apt-get update
sudo apt-get install wvdial
sudo gedit /etc/wvdial.conf

Uncomment username and password field

Username = YOUR USERNAME
Password = YOUR PASSWORD

Add this line at end

Stupid Mode = 1

Save file. Now in Terminal

sudo wvdial

Now , you can try to ping Google to make sure connection works.

1
  • After running final command, it gave me: --> WvDial: Internet dialer version 1.61 --> Cannot open /dev/modem: No such file or directory --> Cannot open /dev/modem: No such file or directory --> Cannot open /dev/modem: No such file or directory
    – rusty-sj
    Jan 27, 2014 at 2:25
0

On your terminal:

cd /dev/disk/by-id

ls

look for something similar to usb-HUAWEI_Mass_Storage_ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ-0:0 mount this device on a mount path

mount usb-HUAWEI_Mass_Storage_ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ-0\:0 /mnt
cd /mnt
sh ./install_linux

as soon as the installation is done, you can Tata Photon GUI will come and you can continue browsing as you used to do before.

Source: http://jainkkapil.wordpress.com/2012/08/29/tata-photon-in-ubuntu-12-04/

1
  • After running the ls command, I didn't find the HUAWEI mass storage. Instead there are these two: usb-ZTE_MMC_Storage_MF6310ZTED010000-0:1 usb-ZTE_USB_SCSI_CD-ROM_MF6310ZTED010000-0:0 So I tried running mount usb-ZTE_MMC_Storage_MF6310ZTED010000-0:1 and it said mount: can't find usb-ZTE_MMC_Storage_MF6310ZTED010000-0:1 in /etc/fstab or /etc/mtab
    – rusty-sj
    Jan 27, 2014 at 1:57

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .