10

I just upgraded my system and did a clean install of Ubuntu when I did (Installed Oneiric Ocelot from the CD last week but yesterday upgraded to 12.04 LTS). I have an i7 920 (quad core with hyperthreading), so I should be seeing 8 processors, but I only see one in the System Monitor graph.

cat /proc/cpuinfo returns:

processor   : 0
vendor_id   : GenuineIntel
cpu family  : 6
model       : 26
model name  : Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz
stepping    : 4
microcode   : 0x10
cpu MHz     : 2672.633
cache size  : 8192 KB
physical id : 0
siblings    : 1
core id     : 0
cpu cores   : 1
apicid      : 0
initial apicid  : 0
fpu     : yes
fpu_exception   : yes
cpuid level : 11
wp      : yes
flags       : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc up arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida dts tpr_shadow vnmi flexpriority ept vpid
bogomips    : 5345.26
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

From my recollection of previous installs with SMP working, there should be multiple entries in /proc/cpuinfo--one per processor. I see only one.

My first thought was that a non-SMP kernel was installed. However, uname -a returns:

Linux compname 3.2.0-24-generic #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

So am I using all available cores or not? And if not, what is causing it given that I appear to be running an SMP kernel?

Thanks!

Improve this question
3
  • If /proc/cpuinfo says you have one core, Linux is only using one core. I'm puzzled as to why.
    – Gilles 'SO- stop being evil'
    Apr 29, 2012 at 14:57
  • @Rinzwind That's a great suggestion. I turned them off the other day because my suspend was going wonky, but I'll turn them back on as soon as I get to a point where I can reboot and let you know how it went.
    – Ari B. Friedman
    Apr 29, 2012 at 15:07
  • Nice question bro!
    – gajdipajti
    Apr 29, 2012 at 19:30

2 Answers 2

Reset to default
8

Enable ACPI features in your BIOS. If you turn this off your system will use 1 cpu.

Improve this answer
1
1

I had the similar problem. Found out that as of 05/22, VBox 6.1.34 has ACPI feature turned on by default. They have the now added a simpler dragger in Settings -> System -> Processors where you can choose from 1 upto the maximum number of cores available on your system.

Turns out it is set to 1 by default. Once set to any plural number of cores, things execute in parallel, e.g.: there's no need to create a hostfile (https://stackoverflow.com/a/35705720/6923484)

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .