18

I'm searching for a tool to backup a whole ext4 partition to an image. I tried the latest version of mondo, which is not working. What are good alternatives?

1

8 Answers 8

13

Take a look at fsarchiver

It can be found on the latest SystemRescueCD

Reportedly made by the same guy who authored partimage.

It sports a lot of improvements including: - ext4 support - ntfs support - file-level instead of block-level - compression using multiple cores

Basically, after a partition is saved/compressed it can be restored to different size partitions, and partitions of different formats (so you can use it to convert a partition's format too), and if part of the backup gets corrupted it doesn't destroy the whole image (like it would on a block-level backup.

The only downside (if you consider it a downside) is, it's only a command line app at the moment (but it should get a gui eventually).


The command line entries are really simple.

To save a partition:

fsarchiver savefs /mnt/backup/gentoo-rootfs.fsa /dev/sda1

Where '/mnt/backup/gentoo-rootfs.fsa' is the path being saved to and '/dev/sda1' is the partition being cloned.

To restore a partition:

fsarchiver restfs /mnt/backup/gentoo-rootfs.fsa id=0,dest=/dev/sda1

Just reverse the options above. From what I understand (in the documentation), it looks like the id=0 is necessary because an image can contain multiple partitions. For more directions on usage (such as saving multiple partitions) checkout the QuickStart guide.

SideNote:

As it turns out, I'm actually writing this (as entertainment) from a Linux Mint LiveCD while I'm cloning a newly updated windows factory install clone. I scoured the net earlier looking for a better partition cloning alternative because I want to finally trash this Ghose '03 disc that I've been using for years. I'll drop a note to let you know how it went after I finish the restore.

Update:

Just finished the backup with no errors. It took a little while because I didn't know about the options to make it multi-threaded when I started. The compression was set to the default value (equivalent to gzip -6), the partition was 4.48GB on disk (highly trimmed/updated XP + Chrome) and the output file weighs in at 2.3GB. No complaints here.

11

Modern versions of e2image (1.42.7 or later) allow efficient cloning/backing up of Ext2/3/4 partitions from the command line.

e2image -ar /dev/sdaX ~/sdaX.img
  • -a ensures that file data, and not just the filesystem structure, is copied.

  • -r ensures that the data is stored in a raw image format (like you would get with dd), as opposed to QEMU's QCOW2 format.

The resulting image will be efficient in terms of disk space usage, because:

  • e2image will not copy blocks that are not in use by existing files
  • when outputting to an image file, it will store it as a sparse file, so that large blocks of zeroes will not take up any space on the disk.

Care still needs to be taken when copying sparse files, to ensure that the zeroes aren't written out when copied.

One way to avoid this is to store the image file inside a squashfs image. This is a read-only, mountable filesystem that compresses the data inside, but still allows the image file within to be seekable and mountable.

8

Try Clonezilla. It runs in a liveCD environment, and supports any sort of partition (including ext4), to a variety of stores (NFS, SMB, SSH, local filesystems).

I use it all the time to image workstations in our labs.

2
  • 1
    Thanks, gave it a try. Looks good. One downside you have to go through really many menus before it starts backup. Are you using commandline for it?
    – fmowrg
    Oct 9, 2010 at 15:12
  • yep, that's the way to go.
    – lfaraone
    Oct 11, 2010 at 23:13
6

dump and restore for ext4 (sudo apt-get install dump) were just designed for that matter. Check this if you are curious:

https://unix.stackexchange.com/a/41445

5

I like dd

dd if=/dev/sda1 (or just sda for the whole disk) of=/home/user/backup.img

and

dd if=/home/user/backup.img of=/dev/sda1

to get it back

3
  • 8
    dd is a very bad tool to use for this purpose. First, it copies everything, including unused sectors. Second, it results in an image that is the same size as the whole disk. Finally, you can not restore it to a smaller disk, and if you restore it to a larger disk, you must resize it after to use the additional space.
    – psusi
    Mar 1, 2011 at 3:26
  • actually, it's possible to zip the img file. It's also possible to just copy the files from inside the image file to a partition (did this with a system, worked!). So the destination partition can have any size. I'm not shure if it's possible to mount a zipped img file.
    – sBlatt
    Mar 1, 2011 at 11:23
  • it is not possible to mount a compressed image.
    – psusi
    Mar 23, 2011 at 17:45
5

'Disks' (gnome-disk-utility) is default in Ubuntu these days.

enter image description here

1
0

Why do you want to create an image? In most cases a file based backup (like a tar ball) gives you much more flexibility when restoring it, e.g. you can restore it on a different file system or even multiple file systems.

1
  • Compressed Tarballs aren't very efficient - you pretty much have to uncompress the whole thing to get a directory listing or extract a specific file. On the other hand, 7-zip can extract from ext2. Or Squashfs supports compression, while still allowing mounting or extracting files.
    – mwfearnley
    Sep 10, 2017 at 15:49
0

In addition to the filebased strategy: try the command rsync to backup your data.

A program similar to this is called Déjà Dup: https://launchpad.net/deja-dup

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .