Reading this link, it describes how to make a RAID array out of USB sticks, however it describes the process using Gentoo now I don't know about gentoo and have never used it, but I'm supposing this is possible in Ubuntu if so how?.
2 Answers
Ubuntu uses udev
so you don't need to execute the mknod
command in those instructions.
As mentioned, mdadm
is well documented as doesn't care whether the devices are hard disks, usb drives, or even LVM partitions. Examples:
Create a mirrored partition:
mdadm /dev/md0 --create --level=1 -n 2 /dev/sdb1 /dev/sdc1
4 disk RAID 5:
mdadm /dev/md5 --create --level=5 -n 4 /dev/sdb2 /dev/sdc2 /dev/sdd2 /dev/sde2
-
So let's say, I've have 2 USB sticks, how would I go and make a RAID (and which RAID should I choose). Aug 8, 2012 at 6:00
-
The guide that you linked will be the same with ubuntu. The raid utility "mdadm" is fairly common and well documented.
You will need to apt-get install mdadm
to have this tool available.